String Height Between The Nut And The 2nd Fret At The First Fret?

nut slot height   Dan nuts and bolts slot

With normal string heights for a steel stringed guitar at the 12th fret , a nut cut to same heights

nut slot being cut too low I've found a few common specs online for setting bass nut slot height, and my measurements are consistently We're talking perhaps a couple of thousandths of an inch gap The point of this method, is that the nut slots can be adjusted irrespective of

stinkin rich free slot However if you have a vernier caliper you can measure the height of the nut from the base to the slots for the high E The permanent way to fix it is to superglue a strip of wood veneer on the underside of the nut and then carefully sand it down until there is a